FIRE RESCUETRUCKS

WATER & FOAM FIRE TRUCKS

Dongfeng 4×2 7,000 L Fire Sprinkler Truck

Dongfeng 4×2 7,000 L Fire Sprinkler Truck. Review the chassis, body and firefighting-system specifications below when assessing fit for your operating requirements.

Primary use: Firefighting vehicle configuration

Configure your vehicle ↗
Dongfeng 4×2 7,000 L Fire Sprinkler Truck

01 / THE COMPLETE VEHICLE

Specify the system.
Confirm the details.

The vehicle details shown here are a starting point. Your quotation will specify the selected chassis, body and firefighting systems for your project.

Body, equipment and operating system.

Review every working system against the mission, payload and destination requirements.

Configuration options.

Share the destination and project requirements for your vehicle.

Price and delivery basis

Reference price: USD 14,000–28,800

Reference price, not an FOB or CIF quotation.

Product SpecificationsShow specificationsHide specifications

Use these specifications to compare the chassis, body and installed equipment.

Chassis & powertrain

Vehicle model
Dongfeng 7T Fire-fighting Sprinkler Truck
Drive layout
4×2
Basic Certification
ISO9000, CCC, TS16949, EPA, EEC, RoHS, CE
Basic Drive Wheel
4×2
Basic Emission Standard
Euro 2/3/4/5/6
Basic Engine
Yunnei 183HP
Basic Engine Capacity
4 - 6L
Basic Fuel
Diesel
Basic Payload
7t
Basic Sprinkling Area
>16m
Basic Tire
8.25r20/6
Basic Transmission Type
Manual
Basic Wheelbase
3800 mm
Spec Basic Information Overall Dimension
7350×2350×2700mm
Spec Basic Information Payload
6735kg
Spec Chassis Cab
Single-row Cab, Non-sleeper
Spec Chassis Engine
Yunnei 183HP
Spec Chassis Tire
8.25R20/6
Spec Chassis Wheelbase
3800 mm

Fire body & tank

Basic Specification
7350×2350×2700mm
Basic Tank Material
High-Quality Steel
Basic Water Tank Capacity
7cbm
Spec Upper Structure Tank Material C071D47C04
High-quality Steel
Spec Upper Structure Water Tank Capacity
7 m³

Working systems

Spec Upper Structure Fire Pump 42B9D2F2B5
CB10/30 Low-pressure Pump, Rear-mounted
Spec Upper Structure Vacuum Pump
Piston Type
Spec Upper Structure Water Monitor
PS8/30, 30L/s

Operating performance specifications

Basic Model No
Dongfeng 7T Fire-fighting Sprinkler Truck
Basic Volume
5001 - 10000L
Spec Basic Information Product Model
Dongfeng 7T Fire-fighting Sprinkler Truck

Similar vehicles

Before requesting a quote.

What water tank is specified for this Dongfeng configuration?

The specified tank is 7 m³ on a Dongfeng 4×2 fire sprinkler truck. The purchase brief should state the water-supply task, crew and equipment carried.

Which engine and pump are described?

The chassis information identifies a Yunnei 183HP engine, and the rear-mounted pumping package is a CB10/30. Describe the required connections and pumping duty in the purchase brief.

How does this truck differ from a water and foam tender?

This page describes a water-oriented fire sprinkler configuration. Compare the separate water/foam tender category where a foam-concentrate installation forms part of the response brief; do not treat the two packages as interchangeable.

03 / YOUR PROJECT

Tell us about
the mission.

Include both chassis preferences and body requirements. Unconfirmed details can remain open for technical review.

Chat on WhatsApp

Specifications are confirmed in the quotation for the ordered vehicle.

WhatsApp